The Best Mold Removal Companies in Atlanta GA Are the Ones Proven Safe To Hire
Companies for mold removal in Atlanta GA who bear The Prime Buyer's Report TOP 10 symbol are those mold remediation contractors proven by our independent research to have passed the TOP 10 requirements for competency and value, carry liability insurance as protection for you the customer, who use only employees legal to work in the U.S., and for whom our staff has called previous customers to verify high satisfaction with them for mold remediation in Atlanta GA, including mold testing services, mold abatement, and mold assessment.
Updated April 14, 2017
|All South Restoration Inc|
2650 Pleasantdale Rd # 7
Atlanta, GA 30340
Areas Served: Fulton County,Alpharetta GA,Atlanta GA,Johns Creek GA,Union City GA,Fairburn GA
Services: professional mold removal, mold spore removal, mold inspections
|Analytical Environmental Service|
3785 Presidential Pkwy
Atlanta, GA 30340
Areas Served: Sandy Springs GA,Atlanta GA,Milton GA,Johns Creek GA,Roswell GA,Sandy Springs GA
Services: mold abatement & mold growth prevention
|Heritage-Crystal Clean LLC|
5100 Tulane Dr SW # A
Atlanta, GA 30336
Areas Served: Atlanta Georgia & Fulton County,Union City,Alpharetta,Johns Creek,Sandy Springs GA
Services: mold remediation contractors for professional mold removal
53 Perimeter Ctr E # 230
Atlanta, GA 30346
Areas Served: Atlanta & Fulton County,Roswell GA,Alpharetta GA,Sandy Springs GA,Johns Creek GA
Services: mold removal experts, mold spore removal
1117 Perimeter Ctr W # W301
Atlanta, GA 30338
Areas Served: East Point GA,Alpharetta GA,Atlanta GA,Sandy Springs GA,Johns Creek GA,Roswell GA
Services: mold inspection, mold abatement, mold spore removal
|Safeair Certified Mold|
789 Hammond Dr NE # 1406
Atlanta, GA 30328
Areas Served: Johns Creek GA,East Point GA,Milton GA,Atlanta GA,Roswell GA,Alpharetta GA,Fairburn
Services: mold cleanup, full service mold removal contractors
The state of Georgia does not regulate mold removal companies and so there is no state license required for mold removal in Atlanta GA. If however the mold removal company is removing or replacing structual elements such as walls or floors, then a state contractor license is required but that is no indication of competency since no test or exam is required.
As an unregulated industry, there is also no state mandate requiring a company to first show proof of liability insurance or workers comp insurance as protection for the consumer before performing mold remediation, which is a significant issue since you will be on the hook for property damages or for worker injuries that occur on your property for those mold removal companies who do not have coverage.
So there is no guarantee that any particular mold removal company in Atlanta GA is even competent, is doing business ethically, delivering lasting value, or satisfying customers.
This makes it all the more significant that all services for mold removal in Atlanta GA that bear The Prime Buyer's Report-TOP 10 symbol have been cleared by our research staff as passing all the requirements for Prime Buyer's Report-TOP 10 status such as research phone calls to previous customers to verify high satisfaction, proof of liability insurance and workers comp insurance for your protection, good complaint record, sufficient time in business, only employees legal to work in the U.S., and more.
Mold Services in Atlanta GA
Some companies are licensed by the state as Mold Assessors which allows them to perform mold inspection services, which can also include infared imaging, sometimes referred to as thermal imaging leak detection, to determine the hidden source of moisture leaks leading to mold growth. Companies doing mold assesment in Atlanta GA often perform other testing services such as indoor air quality testing, formaldehyde testing, VOC testing (Volatile Organic Compounds), lead testing, allergen testing, and water testing for coliform bacteria, e. coli bacteria, nitrites, nitrates and more.
Other companies are licensed by the state as Mold Remediators in order to do the actual mold removal or mold abatement. Such companies might or might not also perform the initial mold inspection services.
Mold are fungi of which many different species exist in Georgia. Mold grows by digesting and destroying the material it grows on. Mold reproduces by making spores. When these spores become airborne, they contanimate other areas and material with new mold growth, and can also cause health problems when inhaled.
Mold often grows unnoticed above ceilings and behind walls and can cause extensive structural damage when the mold is living on, feeding off of and breaking down studs and joists. Mold needs moisture and the source can be leaks, high humidity or condensation inside walls due to poor insulation.
Indentifying mold should begin with a visual mold inspection during which sources of excess moisture should be sought as they will need to be corrected to prevent mold from returning even if removed. A mold inspection should be looking for discoloration that continues to grow or change color, or the musty smell associated with mold growth.
If a visual inspection reveals mold, mold testing should not be necessary. But if a mold inspection does not find mold but is still suspected, then mold testing might be required. Mold sampling can be done by collecting samples from dust, the air, and building materials and can also let a mold consultant determine the mold species present, the concentrations, and if it is actively growing. Additional testing can include an evaluation of the relative humidity in the building and taking moisture readings of materials in suspected areas.
Results of a mold inspection and assessment should be provided in a final report that contains three components:
1. Summary of the mold inspection done
Summarizes the scope of the mold inspection performed and specifies the areas which were inspected. Details the techniques which were used to do the mold assessment.
2. Summary of the mold conditions
Summation of the mold growth including specific locations, estimated size of the area impacted and the substrates contaminated with mold growth.
3. Summary of the moisture conditions
Indentifies the source(s) of water and/or moisture intrusion and specifies actions that need to be taken to remove the moisture and prevent it from recurring.
STEPS FOR MOLD REMEDIATION
Indentify and correct the source of moisture allowing mold growth.
Remove and/or clean mold contaminated materials.
Remove the mold and completely dry the area before doing any renovation or replacement work.
Clean up the mold once it has been killed since dead mold can still cause allergies.
Companies for Mold Removal in Atlanta GA Perform Numerous Services
Mold clean-up contractors (also known as mold remediation contractors) can usually perform both water and mold damage restoration. As licensed professionals with both AIAQC and CMRS certifications, mold remediation in Atlanta GA requires skilled technicians that can complete every phase of water and mold clean-up. Due to the specialized equipment and health risks involved with the work, only a trained contractor or technician should perform it.
Some of these mold contractors are proficient in a variety of hazardous material diagnostic methods, including the use of infrared thermal cameras, moisture meters, hygrometers, mold detection dogs, and full microbial surveys. Mold removal contractors go through rigorous training to become certified in the removal, encapsulation and deodorization of problematic, mycotoxin producing molds, including Acremonium, Alternaria, Aspergillius, Chaetomium, Cladosporium, Fusarium, Paecilomyces, Penicillum, Stachybotrys, and Tricoderma.
The best mold contractors in Atlanta GA can also inspect commercial and residential structures for signs of mildew, bacteria, asbestos, lead, allergens, leaks, and moisture intrusion. It's a dirty job, but, once the presence of harmful materials is confirmed, mold removal contractors will perform crawlspace clean-ups, dry ice blasting, air duct cleaning, and water damage dry-outs. They can also remove water from sheetrock, walls, floors, attics, crawlspaces, insulation, all types of flooring, and wood structures.
Some mold cleanup contractors in Atlanta GA will manage the entire project themselves, offering lab analysis with 24 hour lab test results and completion of necessary insurance work. Following restoration or reconstruction, some companies can conduct post-remediation indoor air quality testing if the situation calls for it. With trained biologists and technicians on staff, the water and mold contractors in Atlanta GA can offer up their expert consultation for structural sewage/water loss assessments, litigation support, expert witness testimonials, real estate inspections, and medical consults.
The Best Mold Removal in Atlanta GA Requires Advanced Technology
Mold clean up contractors use some pretty impressive equipment to remediate water or mold damage. They can apply infrared thermal imaging technology to detect areas of moisture and use air movers, fans, and dehumidifiers to dry out the affected areas. When it comes to cleaning and removing these potentially hazardous particles, mold cleaning contractors use dry ice blasters, fungicides, ozone generators, air purifiers, grinders, wire brushes, lint-free wipes and pump sprayers.
The best mold removal companies in Atlanta GA also come prepared with HEPA negative air units, HEPA orbital sanders, HEPA air scrubbers, and HEPA vacuums. Mold removal contractors play a necessary role in your mold growth resolution. Only their state-of-the-art tools can exorcise the silent threat that is mold to restore the safety of your home and the health of your family.
Some Companies for Mold Remediation in Atlanta GA Are A Better Value Than Others
The Prime Buyer's Report lists these remediation services for mold in Atlanta GA: Safeair Certified Mold, Heritage-Crystal Clean LLC, Safety-Kleen Systems, All South Restoration Inc, Analytical Environmental Service, Trinity Consultants. Other companies to remedy mold in Atlanta GA that might still be in business include: .
Associations & Licensing Relevant to Mold in Atlanta GA
AIAQC American Indoor Air Quality Council www.iaqcouncil.org
AIHA American Industrial Hygiene Association www.aiha.org
ASCR Association of Specialists in Cleaning and Restoration www.ascr.org
BBB Better Business Bureau www.bbb.com
Georgia Department of Public Health www.dph.georgia.gov
AirNow - Georgia Air Quality www.airnow.gov/index.cfm?action=airnow.local_state&stateid=11
EPA Environmental Protection Agency www.epa.gov
ERRA Environmental Risk Resources Association www.erraonline.org
IAQA Indoor Air Quality Association www.iaqa.org
IICRC Institute of Inspection, Cleaning and Restoration Certification www.iicrc.org
NAMP National Association of Mold Professionals www.moldpro.org
NAMRI National Association of Mold Remediators and Inspectors www.namri.org
Media & Web Resources Relevant to Mold Removal in Atlanta GA
Cleaning and Restoration Magazine
Cleaning Maintenance and Management Magazine
Mold and Moisture Management Magazine
Restoration and Remediation Magazine
Risk Management Magazine
The Prime Buyer's Report provides information for the TOP 10 Mold Removal in Atlanta GA within the following zip codes:
The Prime Buyer's Report provides information for the TOP 10 Mold Remediation in Atlanta GA within the following cities:
Sandtown, College Park, Alpharetta, Atlanta, Roswell, Sandy Springs, Hapeville, Chattahoochee Hills, Union City, Palmetto, Johns Creek, Milton, Fairburn and East Point